Use 1-1/4″ pocket hole screws to secure the 1×2 spacers (they are flush with the legs like the shelf supports), and 2-1/2″ pocket hole screws to secure the front end of the 2×2 supports then 2″ pocket hole screws to support the back end of the supports.Ĭut the piece for the top. Position the dividers first, securing them with glue and 2-1/2″ pocket hole screws, then position and secure the spacers and supports. Drill pocket holes in each end of each piece. Secure the stretchers first, using glue and 2-1/2″ pocket holes, then secure the divider to the lower stretcher using glue and 2-1/2″ pocket hole screws.Ĭut the pieces for the drawer slide spacers, supports, and dividers. Drill pocket holes in each end of the pieces. Position the shelf on the supports then secure using glue and 1-1/4″ brad nails.Ĭut the pieces for the stretchers and the divider. Use 1-1/4″ pocket hole screws through the 1×2 pieces into the legs and 2″ pocket hole screws through the 2×2 piece into the back.Ĭut the piece for the shelf and cut the notches using a jigsaw. Secure the supports as shown using glue and pocket hole screws. The 1×2 pieces will be located so that they are flush with the inside of the legs. Use 2-1/2″ pocket hole screws through the frame pieces, and 1-1/4″ pocket hole screws through the panel.Ĭut the pieces for the shelf supports and drill pocket holes in each end. Secure the bottom to the legs and sides using glue and pocket hole screws. The panel will be flush with the top edge of the frame piece. Attach the frame piece to the panel using glue and 1-1/4″ pocket hole screws. Use 2-1/2″ pocket hole screws through the frame pieces, and 1-1/4″ pocket hole screws through the panel.Ĭut the pieces for the bottom frame piece and panel. Drill pocket holes in each end of the frame piece as well as all four edges of the panel. Secure the panel assembly to the legs using glue and pocket hole screws. The panel will be located 1-1/4″ away from the inside edge of the frame pieces. Attach the frame pieces to the panel using glue and 1-1/4″ pocket hole screws.
Use 2-1/2″ pocket hole screws through the frame pieces, and 1-1/4″ pocket hole screws through the panels.Ĭut the pieces for the back frame and panel. Drill pocket holes in each end of the frame pieces as well as all four edges of the panel. Attach the frame pieces to the panels using glue and 1-1/4″ pocket hole screws. Drill pocket holes in each end of the frame pieces as well as all four edges of the panels. Cut the decorative arc as desired using a jigsaw or bandsaw.Ĭut the pieces for the side frames and panels. 1 – 3/4″ plywood at 21-3/4″ – Center Drawer FrontĬlick on the drawings for a larger view! Step OneĬut the pieces for the legs.2 – 3/4″ plywood at 5″ x 21″ – Center Drawer Box Front & Back.4 – 3/4″ plywood at 5″ x 19″ – Drawer Box Front & Back.4 – 1×2 at 15″ – Shelf Supports & Drawer Slide Spacers.5 – 2×2 at 65″ – Back & Bottom Frame, Front Stretchers.5 – 2×2 at 15″ – Side Frames & Center Shelf Support.2 sheets of 3/4″ plywood ( PureBond plywood would be perfect!!).Mirror clips (to hold material for door in place).The plans have been drawn up to include glass for the doors but really any medium can be used – 1/4″ plywood, mirrors, punched aluminum, etc. The cabinet features three drawers and a large shelf with four doors.
#Cabinet planner tutorial free#
Today, I’m sharing free DIY woodworking plans to build a Glass Door Cabinet. Free DIY Woodworking Plans to Build a Glass Door Cabinet
0 kommentar(er)
